Chi tiết: - Fastest programming algorithms (as fast as target device's memory technology limit), approved by silicon manufacturers;
- Easy ATE integration;
- Standalone operations (projects and code images stored on a memory card);
- Also controllable by any host system via RS-232 or Ethernet;
- Flexible, fully configurable;
- Compact and robust design for production environments;
- Data integrity guaranteed (every data transfer to/from the host system or Secure Digital card is CRC tagged).
The FlashRunner II series includes all of the programming algorithms that have been developed for a silicon manufacturer of your choice ( see below).
Hardware Features
FlashRunner features state-of-the-art electronics to provide you with high integration flexibility in a compact footprint.
FlashRunner features state-of-the-art electronics to provide you with high integration flexibility in a compact footprint.
- 9 to 24V DC power supply input;
- Five digital I/O lines;
- Two digital I/O or analog output lines;
- Two programmable output voltages (0 to 15V, 0.25A and 0 to 5V, 0.5A);
- One analog input line;
- One programmable clock output;
- Secure Digital memory card (up to 2 GB);
- 512 bytes on-board dynamic memory;
- On-board timekeeper and calendar;
- I/O protection;
- Optoisolated inputs for project selection;
- Two optoisolated command inputs (START and STOP);
- Three optoisolated status outputs (FAIL, PASS, BUSY);
- Optoisolated RS-232/Ethernet channel.
FlashRunner's open architecture makes its firmware easily upgradable to support both new devices and new features.
Software Features
FlashRunner Control Panel FlashRunner is set up and controlled via ASCII-based commands. FlashRunner can receive and execute commands in two ways:
FlashRunner is set up and controlled via ASCII-based commands. FlashRunner can receive and execute commands in two ways:
- Over the RS-232 or Ethernet connection (Host mode);
- Via "scripts" stored in its SD card (Standalone mode).
In the first case, FlashRunner is controlled by a host system (e.g. Windows HyperTerminal); in the latter case, FlashRunner works in standalone mode and is fully autonomous.
- Fully autonomous standalone mode thanks to its SD memory card (FAT16);
- Controllable by any host system through a terminal utility and simple ASCII protocol;
- Unlimited projects (scripts);
- Log files;
- Erase, blank check, program, read, verify, oscillator trimming, etc.
FlashRunner comes with a Windows utility that allows you to communicate with the instrument and perform the most common operations: send commands, manage SD card files, update the instrument's firmware, etc.
Available Models
The FlashRunner II series includes the following models:
| FR02ATM0 | Supports Atmel devices | | FR02FJT0 | Supports Fujitsu devices | | FR02FSL0 | Supports Freescale devices | | FR02INF0 | Supports Infineon devices | | FR02MCP0 | Supports Microchip devices | | FR02NEC0 | Supports NEC devices | | FR02NXP0 | Supports NXP devices | | FR02REN0 | Supports Renesas devices | | FR02SLL0 | Supports Silicon Labs devices | | FR02STM0 | Supports STMicroelectronics devices | | FR02TXI0 | Supports Texas Instruments devices |
|
Trang chủ 
TIN TỨC 
FlashRunner II Series: Manufacturer-Specific In-System Programmers 2009-05-08
){kind=link}
){kind=link}